HYBRID BATTERY SYSTEM PROBLEM SYMPTOMS TABLE

Hybrid Battery System
Symptom	Suspected Area	See page
"Maintenance required for Traction battery cooling parts. See owner's manual." is displayed on the multi-information display.1 (for TFT Meter Type) Go to service warning light in the combination meter assembly illuminates.1 (except TFT Meter Type)	1. Make sure the air intake port is not blocked.	-
	2. Make sure there are no gaps between the connecting parts of the ducts.	-
	3. Clean the battery cooling blower mesh (check for entry of foreign matter).	Click here
	4. Clear the DTCs to reset the learning values even if no DTCs are stored.	Click here
Abnormal sounds are heard from the area around the battery cooling blower assembly.	1. Make sure the air intake port is not blocked.	-
	2. Make sure there are no gaps between the connecting parts of the ducts.	-
	3. Clean the battery cooling blower mesh (check for entry of foreign matter).	Click here
	4. Clear the DTCs to reset the learning values even if no DTCs are stored.	Click here

*1: If a malfunction occurs in the battery cooling blower itself, DTCs P0A82-123, P0A84-123, or P0A85-123 are stored. If only the go to service warning light is illuminated, only perform the inspection of the HV battery cooling system intake port, filter and duct as shown above.