BACK DOOR OUTSIDE GARNISH INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

   Click here

2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

   
   

   1. Engage the 2 clips and install the back door outside garnish.

   2. w/ Parking Assist Monitor System:

      
      

      1. Tighten the 5 nuts.

         Torque:

         4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

   3. w/o Parking Assist Monitor System:

      
      

      1. Tighten the 3 nuts.

         Torque:

         4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

   4. Connect the connectors.

3. INSTALL BACK DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder)

   Click here

4. INSTALL BACK DOOR GARNISH NO. 2 RETAINER (w/ Cover)

   Click here

5. INSTALL BACK DOOR WEIGHT (w/ Back Door Weight)

   Click here

6. INSTALL REAR WIPER MOTOR ASSEMBLY

   Click here