ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE ROOF DRIP SIDE FINISH MOULDING (except Glass Roof)


    1. A01UXUBE02
      Text in Illustration
      *1 Protective Tape

      Apply protective tape as shown in the illustration.

    2. A01V1K3

      Disengage the 2 clips and remove the roof drip side finish moulding.

      Note


      • Do not remove the clips.

      • Replace the clips with supply clips if damaged.

  2. REMOVE ROOF DRIP SIDE FINISH MOULDING (for Glass Roof)


    1. A01UZT8E02
      Text in Illustration
      *1 Protective Tape

      Apply protective tape as shown in the illustration.

    2. A01V12N

      Disengage the 2 clips and remove the roof drip side finish moulding.

      Note


      • Do not remove the clips.

      • Replace the clips with supply clips if damaged.