FRONT DOOR WINDOW FRAME MOULDING INSTALLATION

PROCEDURE

1. INSTALL FRONT DOOR WINDOW FRAME FRONT MOULDING

   
   

   1. Clean the attachment surface.

      
      

      1. Using an infrared light, heat the adhesive remaining on the body.

         Heating Temperature

         Item	Temperature
         Vehicle Body	40 to 60°C (104 to 140°F)

         CAUTION:

         Do not burn yourself on the hot body panel or with the infrared light.

         Note

         Do not heat the vehicle body excessively.

      2. Using a piece of cloth, rub the remaining adhesive off the body.

      3. Using a non-residue solvent, clean the attachment surface.

   2. Remove the release paper from the front door window frame front moulding.

   3. Engage the 2 guides, clip and install a new front door window frame front moulding.

      Note

      Thoroughly press the front door window frame front moulding to ensure that it adheres.