BLACK OUT TAPE(for Center Pillar) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE NO. 3 BLACK OUT TAPE


    1. A01UY00

      Using an infrared light, heat the black out tape.

      Heating Temperature
      Item Temperature
      Vehicle Body 40 to 60°C (104 to 140°F)

      CAUTION:

      Do not burn yourself on the hot body panel or with the infrared light.

      Note

      Do not heat the vehicle body excessively.

    2. Lift the end portion with your fingernail and peel it parallel to the attachment surface.