NAME PLATE REMOVAL

PROCEDURE

1. REMOVE SYMBOL EMBLEM

   
   
   1. 

      Text in Illustration

      *a	Wooden Blocks
      *b	Protective Tape
      *c	Location Pin

      Apply protective tape to the back door panel in the area around the symbol emblem.

   2. Pass a piano wire between the vehicle body and symbol emblem.

   3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

   4. Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

   5. Remove the symbol emblem.

   6. Remove protective tape.

2. REMOVE NO. 6 BACK DOOR NAME PLATE (w/ Rear Wiper)

   
   
   1. 

      Text in Illustration

      *a	Wooden Blocks
      *b	Protective Tape

      Apply protective tape to the back door panel in the area around the No. 6 back door name plate.

   2. Pass a piano wire between the vehicle body and No. 6 back door name plate.

   3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

   4. Pull the piano wire and scrape off the double-sided tape that holds the No. 6 back door name plate to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

   5. Remove the No. 6 back door name plate.

   6. Remove protective tape.

3. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE (w/ Rear Wiper)

   
   
   1. 

      Text in Illustration

      *a	Wooden Blocks
      *b	Protective Tape

      Apply protective tape to the back door panel in the area around the No. 2 luggage compartment door name plate.

   2. Pass a piano wire between the vehicle body and No. 2 luggage compartment door name plate.

   3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

   4. Pull the piano wire and scrape off the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

   5. Remove the No. 2 luggage compartment door name plate.

   6. Remove protective tape.

4. REMOVE SIDE PANEL EMBLEM (w/ Rear Wiper)

   
   

   1. for Back Door:

      
      
      1. 

         Text in Illustration

         *a	Wooden Blocks
         *b	Protective Tape

         Apply protective tape to the back door panel in the area around the side panel emblem.

      2. Pass a piano wire between the vehicle body and side panel emblem.

      3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

      4. Pull the piano wire and scrape off the double-sided tape that holds the side panel emblem to the vehicle body.

         Note

         Be careful not to damage the vehicle body.

      5. Remove the side panel emblem.

      6. Remove protective tape.

5. REMOVE SIDE PANEL EMBLEM (w/ Rear Wiper)

   
   

   1. for Front Fender:

      
      
      1. 

         Text in Illustration

         *a	Wooden Blocks
         *b	Protective Tape

         Apply protective tape to the front fender panel in the area around the side panel emblem.

      2. Pass a piano wire between the vehicle body and side panel emblem.

      3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

      4. Pull the piano wire and scrape off the double-sided tape that holds the side panel emblem to the vehicle body.

         Note

         Be careful not to damage the vehicle body.

      5. Remove the side panel emblem.

      6. Remove protective tape.