REAR SPOILER INSTALLATION

PROCEDURE

1. INSTALL REAR SPOILER SUB-ASSEMBLY

   
   

   1. Clean the attachment surface.

      
      

      1. Using an infrared light, heat the double-sided adhesive tape remaining on the back door panel.

         Heating Temperature

         Item	Temperature
         Vehicle Body	40 to 60°C (104 to 140°F)

         CAUTION:

         Do not burn yourself on the hot back door panel or with the infrared light.

         Note

         Do not heat the back door panel excessively.

      2. Using a piece of cloth, rub the remaining double-sided tape off the back door panel while it is hot from the infrared light.

         Note

         Installing the rear spoiler while any double-sided tape remains on the back door panel may cause adhesion failure. Therefore, completely remove the double-sided adhesive tape.

      3. Using a non-residue solvent, clean the attachment surface.

   2. Engage the 4 clips and install a new rear spoiler.

   3. Tighten the 2 screws.

2. INSTALL REAR SPOILER COVER LH

   
   

   1. 

      Engage the 2 claws and install the rear spoiler cover.

3. INSTALL REAR SPOILER COVER RH

   Tech Tips

   Use the same procedure as for the LH side.