REAR BUMPER INSTALLATION

PROCEDURE

1. INSTALL REAR BUMPER ASSEMBLY

   
   

   1. Connect the connector.

      Tech Tips

      Use the same procedure as for the opposite side.

   2. Engage the clamp to install the wire harness.

      Tech Tips

      Use the same procedure as for the opposite side.

   3. Engage the 8 claws to install the rear bumper assembly.

      Tech Tips

      Use the same procedure as for the opposite side.

   4. Install the 6 clips.

   5. Install the 2 bolts.

   6. Remove the protective tape.

2. INSTALL NO. 1 FLOOR UNDER COVER

   
   

   1. Install the No. 1 floor under cover with the 5 clips.