STOP LIGHT SWITCH INSPECTION

PROCEDURE


  1. INSPECT STOP LIGHT SWITCH ASSEMBLY (for Bulb Type Stop Light)


    1. A01UZ2ZE01
      Text in Illustration
      *a

      Component without harness connected

      (Stop Light Switch Assembly)
      *b Pushed

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Not pushed Below 1 Ω
      Pushed 10 kΩ or higher
      3 - 4 Not pushed 10 kΩ or higher
      Pushed Below 1 Ω

      If the result is not as specified, replace the stop light switch assembly.