FRONT BUMPER INSTALLATION

PROCEDURE


  1. INSTALL FRONT BUMPER ASSEMBLY


    1. w/ Front Spoiler:


      1. Install the 16 grommets.

    2. w/o Front Spoiler:


      1. Install the 5 grommets.

    3. w/ Fog Light:


      1. Connect the 2 connectors.

    4. Engage the 6 claws to install the front bumper assembly.

      Tech Tips

      Use the same procedure for both sides.

    5. Install the 5 screws and 3 bolts.

    6. A0049H8C01
      *1 Pin Hold Clip

      Install the pin hold clip.

      Note


      • Insert the pin hold clip with the slot aligned vertically.

      • Do not rotate the clip after inserting it.

      • After installation, confirm that the slot is aligned vertically.

      Tech Tips

      Use the same procedure for both sides.

    7. Install the 4 clips.

    8. Remove the protective tape.

  2. INSTALL FRONT SPOILER COVER (w/ Front Spoiler)


    1. Install the front spoiler cover with the 11 screws.

  3. ADJUST FOG LIGHT AIMING (w/ Fog Light)

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here