FRONT BUMPER REASSEMBLY

PROCEDURE


  1. INSTALL FRONT BUMPER ENERGY ABSORBER SUB-ASSEMBLY


    1. A01UXXB

      Engage the 3 hooks to install the front bumper energy absorber sub-assembly.

    2. A01UYWR

      Install the 6 screws, 6 clips and grommet.

  2. INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH


    1. A01V1GS

      Engage the 2 guides to install the front side member bracket sub-assembly LH.

    2. Install the 4 bolts.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  3. INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


    1. A01UXPJ

      Install the windshield washer jar assembly with the bolt.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  5. INSTALL FRONT NO. 1 BUMPER STONE DEFLECTOR BRACKET


    1. A01V1U4

      Install the front No. 1 bumper stone deflector bracket with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Tech Tips

      Use the same procedure as for the opposite side.

  6. INSTALL FRONT BUMPER REINFORCEMENT


    1. A01V0JM

      Install the front bumper reinforcement with the 4 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Install the 6 bolts.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }
    3. A01V0NM

      Engage the 2 clamps to install the wire harness.

  7. INSTALL FRONT BUMPER ENERGY ABSORBER


    1. A01V26C

      Engage the 2 guides to install the front bumper energy absorber.

  8. INSTALL RADIATOR SUPPORT EXTENSION LH


    1. A01UY46

      Engage the 2 claws to install the radiator support extension LH.

  9. INSTALL RADIATOR SUPPORT EXTENSION RH

    Tech Tips

    Use the same procedure as for the LH side.

  10. INSTALL NO. 2 RADIATOR SIDE AIR SEAL


    1. A01V0R3

      Engage the 2 claws to install the No. 2 radiator side air seal.

  11. INSTALL NO. 1 RADIATOR SIDE AIR SEAL

    Tech Tips

    Use the same procedure as for the No. 2 radiator side air seal side.

  12. INSTALL RADIATOR SUPPORT OPENING COVER


    1. A01UYW9

      Install the radiator support opening cover with the 4 clips.

  13. INSTALL THERMISTOR ASSEMBLY


    1. A01V0PL

      Engage the 2 clamps to install the thermistor assembly.

  14. INSTALL FRONT BUMPER SIDE RETAINER LH


    1. A01UZV2

      Engage the 2 claws to install the front bumper side retainer LH.

  15. INSTALL FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  16. INSTALL HEADLIGHT ASSEMBLY LH

    Click here

  17. INSTALL HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  18. INSTALL FOG LIGHT COVER LH (w/ Fog Light)


    1. A01V24R

      Engage the 5 claws to install the fog light cover LH.

  19. INSTALL FOG LIGHT COVER RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  20. INSTALL FOG LIGHT COVER LH (w/o Fog Light)


    1. A01V23S

      Engage the 5 claws to install the fog light cover LH.

  21. INSTALL FOG LIGHT COVER RH (w/o Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  22. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  23. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  24. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM


    1. A01UYCM

      Engage the 2 guides and 4 claws to install the radiator grille (or front panel) emblem.

  25. INSTALL FRONT BUMPER MOULDING COVER


    1. A01UXKC

      Engage the 9 claws to install the front bumper moulding cover.

  26. INSTALL HOOD TO RADIATOR GRILLE SEAL


    1. A01UY93

      Engage the 14 clips to install the hood to radiator grille seal.

  27. INSTALL RADIATOR GRILLE


    1. A01UXWU

      Engage the 11 claws to install the radiator grille.

    2. A01UYVB

      Install the clip.

  28. INSTALL RADIATOR GRILLE LOWER MOULDING LH


    1. A01V0BI

      Engage the guide and 6 claws to install the radiator grille lower moulding LH.

    2. Install the 2 screws.

  29. INSTALL RADIATOR GRILLE LOWER MOULDING RH

    Tech Tips

    Use the same procedure as for the LH side.

  30. INSTALL LOWER NO. 1 RADIATOR GRILLE


    1. A01V1O7

      Engage the 2 guides and 27 claws to install the lower No. 1 radiator grille.

    2. A01V0AH

      Install the 2 screws.

  31. INSTALL FRONT BUMPER HOLE COVER


    1. A01UY49

      Engage the hook.

    2. Turn the front bumper hole cover, and engage the 3 claws to install the front bumper hole cover.