FRONT BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE HOOD TO FRONT END PANEL SEAL


    1. A004FHJ

      Disengage the 14 clips to remove the hood to front end panel seal.

  2. REMOVE RADIATOR GRILLE


    1. A004FIW

      Remove the 2 screws.

    2. Remove the 3 clips.

    3. Disengage the 5 claws and 2 guides to remove the radiator grille.

  3. REMOVE FRONT BUMPER HOLE COVER (for Type A)


    1. A004ES5

      Disengage the 2 claws and 2 guides.

    2. A004FP9

      Disengage the hook to remove the front bumper hole cover.

  4. REMOVE FRONT BUMPER HOLE COVER (for Type B)


    1. A004GD0

      Turn the front bumper hole cover and disengage the 3 claws.

    2. A004EQU

      Disengage the hook to remove the front bumper hole cover.

  5. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY


    1. A004EAS

      Disengage the 26 claws and 2 guides to remove the lower radiator grille sub-assembly.

  6. REMOVE FRONT BUMPER SIDE MOULDING LH


    1. A004FVT

      Disengage the 3 claws to remove the front bumper side moulding LH.

  7. REMOVE FRONT BUMPER SIDE MOULDING RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM


    1. A004F33

      Disengage the 4 claws and 2 guides to remove the radiator grill (or front panel) emblem.

  9. REMOVE FRONT FENDER LINER RETAINER


    1. A004EK3

      Disengage the claw to remove the front fender liner retainer.

      Tech Tips

      Use the same procedure for both sides.

  10. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  11. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  12. REMOVE FOG LIGHT COVER LH (w/ Fog Light)


    1. A004EL6

      Remove the outside moulding retainer.

    2. A004EFX

      Disengage the 8 claws and guide to remove the fog light cover LH.

  13. REMOVE FOG LIGHT COVER RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  14. REMOVE FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light)


    1. A004FPC

      Disengage the 6 claws to remove the fog light mounting bracket LH.

  15. REMOVE FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  16. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    1. A004EQN

      Disengage the 8 claws and guide to remove the front bumper hole cover LH.

  17. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  18. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  19. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  20. REMOVE FRONT BUMPER SIDE RETAINER LH


    1. A004GES

      Disengage the 2 claws to remove the front bumper side retainer LH.

  21. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  22. REMOVE THERMISTOR ASSEMBLY


    1. A004EA7

      Disconnect the connector.

    2. Disengage the clamp to separate the wire harness.

    3. Disengage the clamp to remove the thermistor assembly.

  23. REMOVE NO. 1 RADIATOR AIR GUIDE LH


    1. A004FMF

      Disengage the 2 claws to remove the No. 1 radiator air guide LH.

  24. REMOVE NO. 1 RADIATOR AIR GUIDE RH

    Tech Tips

    Use the same procedure as for the LH side.

  25. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE LH


    1. A004E8Y

      Disengage the 2 claws to remove the front radiator side air guide plate LH.

  26. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  27. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A004GFA

      Disengage the 2 guides to remove the front bumper energy absorber.

  28. REMOVE FRONT BUMPER REINFORCEMENT EXTENSION


    1. A004EOEC01
      *a Double-sided Tape

      Disengage the clamp and 2 claws.

    2. Pull out the front bumper reinforcement extension, and then remove the front bumper reinforcement extension while peeling off the double-sided tape.

  29. REMOVE ENGINE UNDER COVER LH

  30. REMOVE ENGINE UNDER COVER RH

  31. REMOVE FRONT BUMPER REINFORCEMENT


    1. A004ECW

      Disengage the 2 clamps to disconnect the wire harness.

    2. A004FQ9

      Remove the 6 bolts.

    3. Remove the 4 nuts and front bumper reinforcement.

  32. REMOVE FRONT NO. 1 BUMPER STONE DEFLECTOR BRACKET


    1. A004EWZ

      Remove the 2 nuts and front No. 1 bumper stone deflector bracket.

      Tech Tips

      Use the same procedure for the opposite side.

  33. SEPARATE WINDSHIELD WASHER JAR ASSEMBLY


    1. A004FZZ

      Remove the bolt and separate the windshield washer jar assembly.

  34. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH


    1. A004EFE

      Remove the 4 bolts.

    2. Disengage the 2 guides to remove the front side member bracket sub-assembly LH.

  35. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  36. REMOVE FRONT BUMPER ENERGY ABSORBER SUB-ASSEMBLY


    1. A004G5J

      Remove the 6 screws, 6 clips and grommet.

    2. A004G5S

      Disengage the 3 hooks to remove the front bumper energy absorber sub-assembly.