REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE NO. 1 FLOOR UNDER COVER


    1. A01UY5P

      Remove the 5 clips and No. 1 floor under cover.

  2. REMOVE REAR BUMPER ASSEMBLY


    1. A01UYC4

      Remove the 2 bolts.

    2. A01UYSSE03
      Text in Illustration
      *a Protective Tape

      Apply protective tape, as shown in the illustration.

      Tech Tips

      Use the same procedure as for the opposite side.

    3. A01UXRI

      Remove the 6 clips.

    4. A01UXRV

      Disengage the 8 claws.

      Tech Tips

      Use the same procedure as for the opposite side.

    5. A01UZUS

      Disengage the clamp to separate the wire harness.

      Tech Tips

      Use the same procedure as for the opposite side.

    6. Disconnect the connector to remove the rear bumper assembly.

      Tech Tips

      Use the same procedure as for the opposite side.