REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type Stop Light) INSTALLATION

PROCEDURE

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

   
   

   1. Engage the clip and 2 guides to install the rear combination light assembly.

   2. Install the screw.

   3. Install the 2 nuts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   4. Connect the connector.

2. INSTALL REAR COMBINATION LIGHT SERVICE COVER

   
   

   1. 

      Engage the 2 guides and 4 claws to install the rear combination light service cover.

3. INSTALL REAR BUMPER COVER

   Click here