REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type Stop Light) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL NO. 2 REAR COMBINATION LIGHT GUIDE


    1. Install a new No. 2 rear combination light guide to the body.

  2. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. Engage the clip and the 2 guides to install the rear combination light assembly.

    2. Install the 2 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the connector.

  3. INSTALL REAR COMBINATION LIGHT SERVICE COVER


    1. A01V02Z

      Engage the 2 guides and 4 claws to install the rear combination light service cover.

  4. INSTALL REAR BUMPER COVER

    Click here