REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type Stop Light) DISASSEMBLY

PROCEDURE


  1. REMOVE REAR BUMPER SIDE SUPPORT

    Click here

  2. REMOVE REAR COMBINATION LIGHT BODY PACKING


    1. A01V203

      Remove the rear combination light body packing.

      Note


      • Be sure to remove all the traces of the old packing from the body.

      • Do not reuse the removed packing. Be sure to install a new rear combination light body packing to prevent water ingress.

  3. REMOVE TAIL AND STOP LIGHT BULB


    1. A01V21X

      Turn the rear combination light socket and wire sub-assembly and bulb in the direction indicated by the arrow in the illustration to remove them.

    2. Remove the tail and stop light bulb from the rear combination light socket and wire sub-assembly.

  4. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01V26T

      Turn the rear combination light socket and wire sub-assembly and bulb in the direction indicated by the arrow in the illustration to remove them.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  5. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01UZOH

      Disengage the 2 clamps to remove the rear combination light socket and wire sub-assembly.

  6. REMOVE REAR COMBINATION LIGHT PROTECTOR


    1. A01V1ED

      Remove the 2 screws and the rear combination light protector.