REAR COMBINATION LIGHT ASSEMBLY(for LED Type Stop Light) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. Engage the clip and 2 guides to install the rear combination light assembly.

    2. Install the screw.

    3. Install the 2 nuts.

      Torque:
      6.2 N*m  { 63 kgf*cm, 55 in.*lbf }

    4. Connect the connector.

  2. INSTALL REAR COMBINATION LIGHT SERVICE COVER


    1. A0047L2

      Engage the 2 guides and 4 claws to install the rear combination light service cover.

  3. INSTALL REAR BUMPER COVER

    Click here