REAR COMBINATION LIGHT ASSEMBLY(for LED Type Stop Light) INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. A004EYRC06
      *a

      Component without harness connected

      (Rear Combination Light Assembly LH)

      Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights come on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 4 (B)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Stop light comes on

      Auxiliary battery positive (+) → Terminal 2 (TL)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Taillight comes on

      Auxiliary battery positive (+) → Terminal 1 (B)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Rear turn signal light comes on

      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. A004EYRC06
      *a

      Component without harness connected

      (Rear Combination Light Assembly RH)

      Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights come on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 4 (B)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Stop light comes on

      Auxiliary battery positive (+) → Terminal 2 (TL)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Taillight comes on

      Auxiliary battery positive (+) → Terminal 1 (B)

      Auxiliary battery negative (-) → Terminal 3 (E)

      		 Rear turn signal light comes on

      If the result is not as specified, replace the rear combination light assembly RH.