REAR COMBINATION LIGHT ASSEMBLY(for LED Type Stop Light) DISASSEMBLY

PROCEDURE


  1. REMOVE REAR BUMPER SIDE SUPPORT

    Click here

  2. REMOVE REAR COMBINATION LIGHT BODY PACKING


    1. A01UZ3G

      Remove the rear combination light body packing.

      Note


      • Be sure to remove all the traces of the old packing from the body.

      • Do not reuse the removed packing. Be sure to install a new rear combination light body packing to prevent water ingress.

  3. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01UXPZ

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow in the illustration to remove them.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01V15O

      Disconnect the connector.

    2. Disengage the 2 clamps to remove the rear combination light socket and wire sub-assembly.

  5. REMOVE REAR COMBINATION LIGHT PROTECTOR


    1. A01V1ED

      Remove the 2 screws and rear combination light protector.