REAR COMBINATION LIGHT ASSEMBLY(for LED Type Stop Light) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE REAR BUMPER COVER

    Click here

  2. REMOVE REAR COMBINATION LIGHT SERVICE COVER


    1. A01UYY5

      Using a moulding remover, disengage the 4 claws.

    2. Disengage the 2 guides to remove the rear combination light service cover.

  3. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A01UZWX

      Disconnect the connector.

    2. Remove the 2 nuts.

    3. A01V1UP

      Disengage the clip and 2 guides to remove the rear combination light assembly.

  4. REMOVE NO. 2 REAR COMBINATION LIGHT GUIDE


    1. Remove the No. 2 rear combination light guide from the body.