AIR FUEL RATIO SENSOR

INSTALL AIR FUEL RATIO SENSOR

Text in Illustration
*a	Fulcrum Length 30 mm (1.18 in.)
*b	Fulcrum Length 260 mm (10.2 in.)

Using SST, install the air fuel ratio sensor.

Torque:: without SST; 44 N*m { 449 kgf*cm, 32 ft.*lbf }; with SST; 39 N*m { 398 kgf*cm, 29 ft.*lbf }

Tech Tips

This torque value is effective when SST is parallel to the torque wrench.
The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).
The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 260 mm (10.2 in.).
If using a torque wrench with a different length, or connecting the torque wrench and SST at an angle, refer to the alternate torque values Click here.
Perform "Inspection After Repair" after replacing the air fuel ratio sensor Click here.