KNOCK SENSOR INSTALLATION

PROCEDURE


  1. INSTALL KNOCK SENSOR


    1. A01V0OVE01
      Text in Illustration
      *a Front of Engine
      *b 10°
      *c 30°

      Install the knock sensor with the bolt as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Make sure that the knock control sensor is in the correct position.

    2. Connect the knock sensor connector.

  2. INSTALL INTAKE MANIFOLD

    Click here