ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket to the engine coolant temperature sensor.

   2. Using a union nut wrench 19 mm, install the engine coolant temperature sensor.

      Torque:

      20 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a union nut wrench Click here.

      Tech Tips

      Perform "Inspection After Repair" after replacing the engine coolant temperature sensor Click here.

   3. Connect the engine coolant temperature sensor connector.

   4. Connect the wire harness and engage the clamp.

2. ADD COOLANT (for Engine)

   Click here

3. INSPECT FOR COOLANT LEAK (for Engine)

   Click here

4. INSTALL INVERTER WITH CONVERTER ASSEMBLY

   Click here