CRANKSHAFT POSITION SENSOR INSPECTION

PROCEDURE


  1. INSPECT CRANKSHAFT POSITION SENSOR


    1. A01V0C3E05
      Text in Illustration
      *a

      Component without harness connected

      (Crankshaft Position Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Cold 985 to 1600 Ω
      Hot 1265 to 1890 Ω

      Tech Tips

      In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F). If the resistance is not as specified, replace the crankshaft position sensor.