CRANKSHAFT POSITION SENSOR REMOVAL

PROCEDURE

1. REMOVE CRANKSHAFT POSITION SENSOR

   
   

   1. 

      Disconnect the crankshaft position sensor connector.

   2. Remove the bolt and crankshaft position sensor.

2. REMOVE O-RING

   
   
   1. 

      *1

      O-ring

      Remove the O-ring from the crankshaft position sensor.

      Note

      
      

      • Make sure to only remove the O-ring with bare hands.

      • When removing the O-ring, be careful not to damage the O-ring groove of the crankshaft position sensor.

      • If the O-ring groove of the crankshaft position sensor is damaged, replace the crankshaft position sensor with a new one.