THROTTLE BODY ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

   
   

   1. Set the vehicle to inspection mode Click here.

   2. Start the engine and check that the MIL is not illuminated. After the engine is warmed up, check that the idle speed is within the specified range when the A/C is switched off.

      Standard
      Condition Engine Idle Speed A/C switched off 950 to 1050 rpm

      Note

      
      

      • Be sure to perform this step with all accessories off.

      • Make sure that park (P) is selected.