BRAKE GENERAL MAINTENANCE

PROCEDURE


  1. INSPECT BRAKE LINE PIPES AND HOSES

    A01UYF4E01

    Tech Tips

    Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.


    1. Using a mirror, check the entire circumference and length of the brake lines and hoses for:


      • Damage

      • Wear

      • Deformation

      • Cracks

      • Kinks

      • Corrosion

      • Leaks

      • Twists

    2. Check all the clamps for tightness and check the connections for leakage.

    3. Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.

    4. Check that the lines are installed properly and pass through the center of the grommets.

  2. INSPECT BRAKE PEDAL


    1. Check the brake pedal.

      Type See procedures
      LHD

      Click here

      RHD

      Click here

  3. INSPECT PARKING BRAKE


    1. Check the parking brake shoe clearance and parking brake lever travel Click here.

    2. Check the parking brake cables to ensure that they are not deformed or binding.

  4. INSPECT FRONT BRAKE


    1. Check the front brake pads and discs Click here.

  5. INSPECT REAR BRAKE


    1. Check the rear brake pads and discs Click here.

  6. INSPECT OR CHANGE BRAKE FLUID


    1. Inspect or change the brake fluid Click here.

      Fluid
      SAE J1703 or FMVSS No. 116 DOT3