| Water inlet with thermostat sub-assembly | ||
| Standard valve opening temperature | - | 80 to 84°C (176 to 183°F) |
| Standard valve lift | - | 0.8 mm (0.315 in.) or more at 95°C (203°F) |
| Cooling fan motor | ||
| Standard Current | 20°C (68°F) at 12 V | 12.2 to 15.7 A |
| Water filler cap sub-assembly | ||
| Standard value | Brand-new cap | 93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi) |
| Minimum standard value | Used cap | 78.5 kPa (0.8 kgf/cm2, 11.4 psi) |
| Fan relay | ||
| Standard resistance | 3 - 5 | 10 kΩ or higher (When battery voltage is not applied between terminals 1 and 2) |
| Below 1 Ω (When battery voltage is applied between terminals 1 and 2) | ||