| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Camshaft timing gear assembly x Camshaft | 64 | 652 | 47 | |
| Camshaft timing gear or sprocket x No. 2 camshaft | 64 | 652 | 47 | |
| No. 1 camshaft bearing cap x Cylinder head sub-assembly | 23 | 234 | 17 | |
| No. 2 camshaft bearing cap x Cylinder head sub-assembly | 13 | 129 | 9 | |
| Cylinder head cover sub-assembly x Cylinder head sub-assembly | 13 | 132 | 10 | |
| Engine wire x Cylinder head cover sub-assembly | 8.4 | 85 | 74 in.*lbf | |
| Brake master cylinder reservoir assembly x Body | 8.0 | 82 | 71 in.*lbf | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Cylinder head sub-assembly x Cylinder block | 1st | 29 | 300 | 22 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3rd | Turn 90° | Turn 90° | Turn 90° | |
| No. 1 camshaft bearing cap x Cylinder head sub-assembly | 23 | 234 | 17 | |
| No. 2 camshaft bearing cap x Cylinder head sub-assembly | 13 | 129 | 9 | |
| No. 1 chain vibration damper x Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| No. 1 chain tensioner assembly x Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Crankshaft damper sub-assembly x Crankshaft | 128 | 1305 | 94 | |
| Engine mounting insulator sub-assembly RH x Body and Engine assembly | 52 | 530 | 38 | |
| Engine room relay block and junction block assembly x Body | 5.4 | 55 | 48 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Flywheel sub-assembly x Crankshaft | 83 | 846 | 61 | |
| Transmission input damper assembly x Flywheel sub-assembly | 25 | 255 | 18 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Engine mounting insulator LH x Body and Engine assembly | 52 | 530 | 38 | |
| Engine mounting insulator RH sub-assembly x Body and Engine assembly | 52 | 530 | 38 | |
| Hybrid vehicle transaxle assembly x Engine assembly | for hybrid vehicle transaxle assembly side | 64 | 653 | 47 |
| for engine assembly side | 30 | 301 | 22 | |
| Starter hole insulator x Engine assembly | 30 | 301 | 22 | |
| Drive shaft heat insulator bracket x Engine assembly | 30 | 301 | 22 | |
| Drive shaft heat insulator sub-assembly x Drive shaft heat insulator bracket | 18 | 179 | 13 | |
| Wire harness clamp bracket x Hybrid vehicle transaxle assembly | 13 | 130 | 9 | |
| Transmission control cable clamp x Hybrid vehicle transaxle assembly | 12 | 122 | 9 | |
| Front suspension crossmember x Body | Bolt A | 87 | 887 | 64 |
| Bolt B | 151 | 1539 | 111 | |
| Bolt C | 98 | 999 | 72 | |
| Inverter bracket assembly x Hybrid vehicle transaxle assembly | 21 | 214 | 15 | |
| Earth wire x Inverter bracket assembly | 8.4 | 85 | 74 in.*lbf | |
| Inverter reservoir tank assembly x Inverter bracket assembly | 7.0 | 71 | 62 in.*lbf | |
| Motor cable protector x Inverter bracket assembly | 8.0 | 82 | 71 in.*lbf | |
| No. 1 engine hanger x Engine assembly | 44 | 448 | 32 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Stud bolt x Oil pan sub-assembly | 5.0 | 51 | 44 in.*lbf | |
| Oil pan sub-assembly x Cylinder block | 24 | 245 | 18 | |
| Oil strainer subassembly x Oil pan sub-assembly | 13 | 132 | 10 | |
| No. 2 oil pan sub-assembly x Oil pan sub-assembly | 9.0 | 92 | 80 in.*lbf | |
| Oil pan drain plug x No. 2 oil pan sub-assembly | 38 | 382 | 28 | |
| Oil filter union x Oil pan sub-assembly | 30 | 306 | 22 | |
| Camshaft timing gear or sprocket x No. 2 camshaft | 64 | 652 | 74 | |
| No. 1 camshaft bearing cap x Cylinder head sub-assembly | 23 | 234 | 17 | |
| No. 2 camshaft bearing cap x Cylinder head sub-assembly | 13 | 129 | 9 | |
| Crankshaft damper sub-assembly x Crankshaft | 128 | 1305 | 94 | |
| Water inlet housing x Cylinder block | 25 | 255 | 18 | |
| Water pump assembly x Water inlet housing | 21 | 214 | 15 | |
| Water inlet with thermostat sub-assembly x Water inlet housing | 10 | 102 | 7 | |
| Fuel delivery pipe x Cylinder head sub-assembly | Bolt A | 21 | 214 | 15 |
| Bolt B | 10 | 102 | 7 | |
| Cylinder head cover sub-assembly x Cylinder head sub-assembly | 13 | 132 | 10 | |
| Ventilation valve sub-assembly x Cylinder head cover subassembly | 27 | 275 | 20 | |
| Oil pressure switch assembly x Cylinder block | 15 | 153 | 11 | |
| Engine coolant temperature sensor x Cylinder head sub-assembly | 20 | 204 | 15 | |
| Knock control sensor x Cylinder block | 20 | 204 | 15 | |
| Crankshaft position sensor x Timing chain cover | 7.5 | 76 | 66 in.*lbf | |
| Camshaft timing oil control valve assembly x Cylinder head sub-assembly | 7.5 | 76 | 66 in.*lbf | |
| Camshaft position sensor x Cylinder head sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| Stud bolt x Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Wire harness clamp bracket x Cylinder head cover sub-assembly | 8.4 | 85 | 74 in.*lbf | |
| No. 1 water by-pass pipe x Engine assembly | 10 | 102 | 7 | |
| No. 4 water by-pass hose x Engine assembly | 10 | 102 | 7 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Stud bolt x Cylinder head sub-assembly | Bolt A | 10 | 102 | 7 |
| Bolt B | 4.0 | 41 | 35 in.*lbf | |
| Bolt C | 10 | 102 | 7 | |
| Bolt D | 9.0 | 92 | 80 in.*lbf | |
| Straight screw plug x Cylinder head sub-assembly | 30 | 306 | 22 | |
| Taper screw plug x Cylinder head sub-assembly | 44 | 449 | 32 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Stud bolt x Cylinder block | 10 | 102 | 7 | |
| Water by-pass hose union x Cylinder block | 35 | 357 | 26 | |
| Crankshaft bearing cap x Cylinder block | 1nd | 22 | 224 | 16 |
| 2rd | Turn 90° | Turn 90° | Turn 90° | |
| Connecting rod cap x Connecting rod | 1st | 15 | 153 | 11 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |