PROCEDURES NECESSARY WHEN AUXILIARY BATTERY TERMINAL IS DISCONNECTED/RECONNECTED
| Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed | See page |
|---|---|---|
| Unlock back door | Back door opener |
PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED
| Replacement Part | Necessary Procedure | Effect/Inoperative Function when Necessary Procedures are not Performed | See page |
|---|---|---|---|
|
Inspection after repair | Poor idle, engine starting, etc | |
| Brake booster with master cylinder assembly |
|
|
Click here for Initialization Click here for Calibration |
|
|
||
| Yaw rate and acceleration sensor (airbag sensor assembly) |
|
|
|
| Power steering ECU assembly |
|
|
|
| Electric power steering column sub-assembly | Torque sensor zero point calibration | Steering effort is different between turning steering wheel to left and right | |
w/ Power Switch: |
|
|
Refer to the Service Bulletin for the registration procedure. |
w/o Power Switch: |
Code registration (Engine immobiliser system) | Hybrid control system start | Refer to the Service Bulletin for the registration procedure. |
w/o Power Switch: |
Code registration (Wireless door lock control system) | Wireless door lock control system | |
|
Initialize power window control system |
|
|
| Pre-crash safety city sensor |
|
|