BACK DOOR OUTSIDE GARNISH INSTALLATION


  1. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR


    1. A01NGR1

      Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door outside garnish protector to the back door outside garnish.

  2. INSTALL BACK DOOR GARNISH SIDE PROTECTOR LH


    1. A01NHB1

      Wipe off any tape adhesive residue with cleaner.

    2. Install new back door outside garnish protector LH to the back door outside garnish.

  3. INSTALL BACK DOOR GARNISH SIDE PROTECTOR RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  4. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY


    1. A01NFQB

      Install the back door opener switch assembly.

  5. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. Install 2 bolts.

    2. Install 2 stud bolts.

    3. Install 2 new clips and 4 new gaskets on the back door outside garnish assembly.

    4. A01NHU7

      Engage the 2 clips and install the back door outside garnish sub-assembly.

    5. A01NHHZ

      Install the 4 nuts.

      Torque:
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

    6. Connect each connector.

  6. INSTALL BACK DOOR TRIM PANEL ASSEMBLY


    1. A01NH51E01
      Text in Illustration
      *1 2-piece Type Clip

      Engage the 2 claws and 16 clips to install the back door trim panel assembly.

    2. Install the 2 screws.

  7. INSTALL BACK DOOR SERVICE HOLE COVER LH


    1. A01NH4X

      Engage the 5 claws to install the back door service hole cover LH.

  8. INSTALL BACK DOOR SERVICE HOLE COVER RH


    1. A01NCYF

      Engage the 5 claws to install the back door service hole cover RH.

  9. INSTALL BACK DOOR UPPER TRIM COVER LH


    1. A01ND49

      Engage the 2 claws to install the back door upper trim cover LH.

  10. INSTALL BACK DOOR UPPER TRIM COVER RH


    1. A01NF17

      Engage the 2 claws to install the back door upper trim cover RH.

  11. INSTALL NO. 2 ROOM LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01NHOL

      Engage the claw to install the No. 2 room light assembly.

  12. INSTALL BACK DOOR LOCK COVER


    1. A01NDAS

      Engage the 4 claws to install the back door lock cover.

  13. INSTALL BACK DOOR FINISH COVER LH (w/o Power Back Door)


    1. A01NFVY

      Engage the 6 claws to install the back door finish cover LH.

  14. INSTALL BACK DOOR TRIM BASE (w/ Power Back Door)


    1. A01NHW1

      Engage the 4 claws to install the back door trim base.

  15. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door)


    1. A01NHXM

      Engage the 6 claws to install the back door finish cover RH.

  16. INSTALL DOOR PULL HANDLE WITH SWITCH (w/ Power Back Door)


    1. Connect the connector.

    2. A01NH9U

      Engage the 6 claws to install the door pull handle with switch.

  17. INSTALL TONNEAU COVER SUB-ASSEMBLY