SIDE MOULDING REMOVAL


  1. REMOVE FRONT DOOR LOWER OUTSIDE MOULDING


    1. A01NI0DE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front door lower outside moulding.

    2. A01NGG5

      Disengage the 5 claws and 5 clips to remove the front door lower outside moulding.

    3. Remove the 5 clips (quarter vent louver retainer) from the front door lower outside moulding.

  2. REMOVE FRONT DOOR NO. 3 WEATHERSTRIP


    1. A01ND15

      Disengage the 9 clips and remove the front door No. 3 weatherstrip.

  3. REMOVE FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY

    Tech Tips

    When removing the front door outside moulding sub-assembly, heat the vehicle body and front door outside moulding sub-assembly using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body or mouldings excessively.


    1. A01NE1CE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front door outside moulding sub-assembly.

    2. A01NGV1

      Remove the hole plug and nut.

    3. A01NGEME01
      Text in Illustration
      *1 Double-sided Tape

      Disengage the 10 clips and guide, and remove the front door outside moulding sub-assembly.

    4. Remove the 10 clips (quarter vent louver retainer) and bolt from the front door outside moulding sub-assembly.

    5. Remove the gasket.

  4. REMOVE REAR DOOR LOWER OUTSIDE MOULDING


    1. A01NGMTE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear door lower outside moulding.

    2. A01NHRB

      Disengage the clip and disconnect the No. 2 access panel weatherstrip.

    3. A01NG5K

      Disengage the 5 claws and 4 clips to remove the rear door lower outside moulding.

    4. Remove the 4 clips (quarter vent louver retainer) from the rear door lower outside moulding.

  5. REMOVE REAR DOOR NO. 3 WEATHERSTRIP


    1. A01NCX0

      Disengage the 6 clips and remove the rear door No. 3 weatherstrip.

  6. REMOVE REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY

    Tech Tips

    When removing the rear door outside moulding sub-assembly, heat the vehicle body and rear door outside moulding sub-assembly using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body or moulding excessively.


    1. A01NH54E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear door outside moulding sub-assembly.

    2. A01NFKR

      Remove the hole plug and nut.

    3. A01NCZEE01
      Text in Illustration
      *1 Double-sided Tape

      Disengage the 8 clips and remove the rear door outside moulding sub-assembly.

    4. Remove the 8 clips (quarter vent louver retainer) and bolt from the rear door outside moulding sub-assembly.

    5. Remove the gasket.