ROCKER PANEL MOULDING INSTALLATION


  1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY


    1. Install 9 new clips (rocker panel moulding clip) to the body rocker panel moulding assembly.

    2. A01NDZD

      Engage the 9 clips to install the body rocker panel moulding assembly.

    3. A01NEML

      Install the 8 clips.

    4. A01NFOE

      Install the screw.

    5. A01NFL4

      Install the screw.

    6. A01NEYI

      Install the grommet.

    7. Using a 4 mm hexagon wrench, install the 2 hexagon screws.

  2. INSTALL QUARTER PANEL WHEEL OPENING MOULDING


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01NHPTE01

      Clean the quarter panel wheel opening moulding.

      Dimension Measurement
      A 0.8 mm (0.0315 in.)
      B 8.0 mm (0.315 in.)

      1. Using a heat light, heat the quarter panel wheel opening moulding.

      2. Remove the double-sided tape from the quarter panel wheel opening moulding.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the quarter panel wheel opening moulding.

    3. A01NGOAE01
      Text in Illustration
      *1 Double-side Tape

      Install the quarter panel wheel opening moulding.


      1. Using a heat light, heat the vehicle body and quarter panel wheel opening moulding.

      2. Remove the release paper from the quarter panel wheel opening moulding.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the quarter panel wheel opening moulding with the 7 screws.