REMOVE ENGINE ROOM SIDE COVER
Remove the 4 clips and engine room side cover.
REMOVE ENGINE ROOM SIDE COVER LH
Remove the 4 clips.
Disengage the guide and remove the engine room side cover LH.
REMOVE COOL AIR INTAKE DUCT SEAL
Remove the 6 clips and cool air intake duct seal.
REMOVE HOOD CENTER CUSHION
Remove the 2 hood center cushions.
REMOVE FRONT BUMPER ASSEMBLY
| *1 | Protective Tape |
Put protective tape around the front bumper assembly.
Tech Tips
Use the same procedure for the RH side and LH side.
Using a screwdriver, turn the pins 90 degrees and remove the 2 pin hold clips.
Tech Tips
Use the same procedure for the RH side and LH side.
Remove the screw and front bumper seal bracket.
Tech Tips
Use the same procedure for the RH side and LH side.
Remove the 2 bolts and 2 screws.
Using a clip remover, remove the 6 clips.
Disengage the 4 claws and remove the front bumper assembly.
Tech Tips
Use the same procedure for the RH side and LH side.
Using a moulding remover, disengage the claw.
Tech Tips
Use the same procedure for the RH side and LH side.
Disconnect the fog light connector.
Disconnect the No. 1 ultrasonic sensor connector. (w/ LEXUS Parking Assist-sensor System)
Disconnect the headlight cleaner hose.
Note
Prepare a drain pan or a piece of cloth in case washer fluid leaks.
Remove the front bumper assembly as shown in the illustration.
REMOVE HOOD TO RADIATOR GRILLE SEAL
Using a clip remover, disconnect the 16 clips and remove the hood to radiator grille seal.
REMOVE RADIATOR GRILLE
Remove the 2 clips.
Disengage the 8 claws and 6 guides to remove the radiator grille.
REMOVE RADIATOR GRILLE EMBLEM (w/o Dynamic Radar Cruise Control System)
Remove the 2 spring nuts.
Disengage the claw and remove the radiator grille emblem.
REMOVE RADIATOR GRILLE EMBLEM (w/ Dynamic Radar Cruise Control System)
Remove the 2 spring nuts.
Disengage the claw and remove the radiator grille emblem.