INSTALL HIGH PITCHED HORN ASSEMBLY
Install the high pitched horn assembly with the bolt.
Connect the connector.
INSTALL FRONT BUMPER ASSEMBLY
Connect the No. 1 clearance sonar connector. (w/ LEXUS Parking Assist-sensor System)
Connect the headlight cleaner hose.
Connect the fog light connector.
Engage the 2 claws and install the front bumper assembly as shown in the illustration.
Engage the 4 claws to install the front bumper assembly.
Tech Tips
Use the same procedure for the RH side and LH side.
Install the 6 clips.
Install the 2 bolts and 2 screws.
Install the front bumper seal bracket.
Tech Tips
Use the same procedure for the RH side and LH side.
Install the screw.
Tech Tips
Use the same procedure for the RH side and LH side.
Install the 2 pin hold clips.
Note
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.
Tech Tips
Use the same procedure for the RH side and LH side.
INSTALL HOOD CENTER CUSHION
Install the 2 hood center cushions.
INSTALL COOL AIR INTAKE DUCT SEAL
Install the cool air intake duct seal with the 6 clips.
INSTALL ENGINE ROOM SIDE COVER
Install the engine room side cover with the 4 clips.
INSTALL ENGINE ROOM SIDE COVER LH
Engage the guide.
Install the engine room side cover LH with the 4 clips.
ADD WASHER FLUID (w/ Headlight Cleaner System)
Add washer fluid to the washer jar.
ADJUST FOG LIGHT AIMING