TURN SIGNAL FLASHER ASSEMBLY INSPECTION


  1. INSPECT TURN SIGNAL FLASHER ASSEMBLY


    1. A01NGQ6E32
      Text in Illustration
      *1

      Front view of wire harness connector

      (to Turn Signal Flasher Assembly)

      Disconnect the F44 turn signal flasher assembly connector.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      F44-1 (IG) - Body ground Power switch off Below 1 V
      Power switch on (IG) 11 to 14 V
      F44-4 (B) - Body ground Always 11 to 14 V

      If the result is not as specified, repair or replace the wire harness or connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      F44-5 (EL) - Body ground Turn signal switch in neutral position 10 kΩ or higher
      Turn signal switch in left turn position Below 1 Ω
      F44-6 (ER) - Body ground Turn signal switch in neutral position 10 kΩ or higher
      Turn signal switch in right turn position Below 1 Ω
      F44-7 (E) - Body ground Always Below 1 Ω
      F44-8 (HAZ) - Body ground Hazard warning switch off 10 kΩ or higher
      Hazard warning switch on Below 1 Ω

      If the result is not as specified, repair or replace the wire harness or connector.

    4. A01NFPAE10
      Text in Illustration
      *1

      Component with harness connected

      (Turn Signal Flasher Assembly)

      Reconnect the F44 turn signal flasher assembly connector.

    5. Measure the voltage according to the valve(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      F44-2 (LR) - Body ground Hazard warning switch off Below 1 V
      Hazard warning switch on 11 to 14 V (60 to 120 times per minute)
      Turn signal switch in neutral position Below 1 V
      Power switch on (IG) and turn signal switch in right turn position 11 to 14 V (60 to 120 times per minute)
      F44-3 (LL) - Body ground Hazard warning switch off Below 1 V
      Hazard warning switch on 11 to 14 V (60 to 120 times per minute)
      Turn signal switch in neutral position Below 1 V
      Power switch on (IG) and turn signal switch in left turn position 11 to 14 V (60 to 120 times per minute)

      If the result is not as specified, the turn signal flasher assembly may have a malfunction.