STOP LIGHT SWITCH INSPECTION


  1. INSPECT STOP LIGHT SWITCH ASSEMBLY


    1. A01NHG8E01
      Text in Illustration
      *1

      Component without harness connected

      (Stop Light Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed 10 kΩ or higher
      Not pushed Below 1 Ω
      3 - 4 Pushed Below 1 Ω
      Not pushed 10 kΩ or higher

      If the result is not as specified, replace the stop light switch assembly.