HEIGHT CONTROL SENSOR INSPECTION


  1. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH


    1. A01NGC5E01
      Text in Illustration
      *1

      Component without harness connected

      (Rear Height Control Sensor Sub-assembly RH)

      Connect 3 dry cell batteries (1.5 V) in series.

    2. Connect the positive (+) lead from the batteries to terminal 3 (SHB) and the negative (-) lead from the batteries to terminal 1 (SHG).

    3. Measure the voltage between terminals 2 (SHRR) and 1 (SHG) while slowly moving the link up and down.

      Standard Voltage
      Tester Connection Condition Specified Condition
      2 (SHRR) - 1 (SHG) +45° (High) 4.05 V
      2 (SHRR) - 1 (SHG) 0°(normal) 2.25 V
      2 (SHRR) - 1 (SHG) -45° (Low) 0.45 V

      If the result is not as specified, replace the rear height control sensor sub-assembly RH.