AUTOMATIC LIGHT CONTROL SENSOR REMOVAL


  1. REMOVE AUTOMATIC LIGHT CONTROL SENSOR


    1. Using moulding remover B, disengage the 11 clips.

      Tech Tips

      Apply protective tape to the areas where the moulding remover B is to be inserted.

    2. Disengage the 7 claws.

      A01NFLHE01
      Text in Illustration
      *1 Moulding Remover B *2 Protective Tape
    3. A01NH8A

      Disengage the 2 claws.

    4. Disconnect the connector and remove the automatic light control sensor.