HIGH INTENSITY DISCHARGE HEADLIGHT BULB INSTALLATION


  1. INSTALL DISCHARGE HEADLIGHT BULB


    1. A01NG69E01

      Lock the set spring to install the discharge headlight bulb in the direction indicated by the arrows shown in the illustration.

      Note

      Do not touch the bulb glass.

    2. A01NHT5

      Turn the light control ECU socket in the direction indicated by the arrow shown in the illustration to connect it.

  2. INSTALL NO. 1 HEADLIGHT BACK COVER


    1. A01NHRI

      Turn the No. 1 headlight back cover in the direction indicated by the arrow shown in the illustration to install it.

  3. CONNECT NO. 3 ENGINE ROOM RELAY BLOCK (for LH Side)


    1. A01NG26

      Engage the claw to connect the No. 3 engine room relay block.

  4. INSTALL COOL AIR INTAKE DUCT SEAL (for LH Side)


    1. A01NDNO

      Install the cool air intake duct seal with the 6 clips.

  5. INSTALL ENGINE ROOM SIDE COVER


    1. A01NHKG

      Install the engine room side cover with the 4 clips.

  6. INSTALL ENGINE ROOM SIDE COVER LH (for LH Side)


    1. A01NH7B

      Engage the guide.

    2. Install the engine room side cover LH with the 4 clips.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL REAR DECK FLOOR BOX


    1. A01NDSY

      Install the rear deck floor box with the 3 clips.