HEADLIGHT ASSEMBLY (for LED Headlight) REASSEMBLY


  1. INSTALL FRONT BUMPER BAR REINFORCEMENT


    1. A01NF59

      Engage the 2 guides.

    2. Install the front bumper bar reinforcement with the 2 screws.

  2. INSTALL HEADLIGHT REFLECTOR


    1. A01NE26

      Connect the connector.

    2. Install the headlight reflector with the 3 screws.

  3. INSTALL HEADLIGHT GASKET


    1. Install a new headlight gasket.

  4. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY


    1. A01NHMW

      Connect the 2 connectors.

    2. A01NGQE

      Install the headlight light control ECU sub-assembly with the 4 screws.

  5. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING


    1. Install a new headlight leveling motor base packing.

  6. INSTALL HEADLIGHT LEVELING MOTOR


    1. A01NF1N

      Engage the tip of the headlight leveling motor with the reflector as shown in the illustration.

    2. A01NDSQ

      Turn the headlight leveling motor in the direction indicated by the arrow in the illustration to install it.

      Tech Tips

      For the headlight leveling motor RH, rotate it symmetrical to the directional arrow shown in the illustration.

  7. INSTALL HEADLIGHT CORD


    1. A01NE23

      Engage the claw and clamp, and install the headlight cord.

  8. INSTALL CLEARANCE LIGHT BULB


    1. Install the clearance light bulb to the headlight cord.

    2. A01NGF9

      Turn the clearance light bulb and headlight cord in the direction indicated by the arrow in the illustration and install them as a unit.

  9. INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. Install the front turn signal light bulb to the front turn signal light socket.

    2. A01NG5Q

      Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow in the illustration and install them as a unit.

  10. INSTALL NO. 1 HEADLIGHT BULB


    1. Connect the connector.

    2. A01NGD9

      Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration to install it.

      Note

      Do not touch the bulb glass.

  11. INSTALL LOCKING CAP


    1. A01NES9

      Turn the locking cap in the direction indicated by the arrow in the illustration to install it.