HEADLIGHT ASSEMBLY (for HID Headlight) REPAIR

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

  • If the installation area of the headlight assembly is damaged, use the supply retainer for low-cost repair.

  • Ensure that the headlight assembly is not damaged.


  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER


    1. A01NGVF

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01NDZI

      Install the upper headlight protector retainer with the 2 screws.

  2. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER


    1. A01NGVS

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01NG96

      Install the lower headlight protector retainer with the 2 screws.