REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY


  1. REMOVE REAR COMBINATION LIGHT GASKET


    1. A01NHRF

      Remove the rear combination light gasket.

      Note


      • Be sure to remove all the traces of the old gasket from the body.

      • Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.

  2. REMOVE TAIL LIGHT BULB


    1. A01NGHT

      Turn the tail light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the tail light bulb from the rear combination light socket and wire sub-assembly.

  3. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01NGB2

      Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01ND09

      Disengage the claw and remove the rear combination light socket and wire sub-assembly.