REAR COMBINATION LIGHT ASSEMBLY REMOVAL


  1. PRECAUTION (w/ Navigation System for HDD)

    Note

    After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

    Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal
    Specification Waiting Time
    w/o Telematics transceiver 60 sec.
    w/ Telematics transceiver 120 sec.

  2. REMOVE REAR DECK FLOOR BOX


    1. A01NDSY

      Remove the 3 clips and the rear deck floor box.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for RH Side)


    1. w/ Air Suspension:

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE TONNEAU COVER ASSEMBLY


    1. Remove the tonneau cover assembly.

  5. REMOVE DECK BOARD SUB-ASSEMBLY


    1. A01NFKA

      Disengage the 3 fasteners as shown in the illustration.

    2. for Compact Spare Tire:


      1. A01NGS3

        Remove the 2 bolts and remove the deck board sub-assembly.

    3. for Full Size Spare Tire:


      1. A01NEZN

        Remove the 2 bolts and remove the deck board sub-assembly.

  6. REMOVE NO. 4 REAR FLOOR BOARD (for LH Side)


    1. for Compact Spare Tire:


      1. Remove the No. 4 rear floor board Click here.

  7. REMOVE NO. 4 REAR FLOOR BOARD (for LH Side)


    1. for Full Size Spare Tire:


      1. Remove the No. 4 rear floor board Click here.

  8. REMOVE DECK SIDE TRIM BOX LH (for LH Side)


    1. for Compact Spare Tire:


      1. Remove the deck side trim box LH Click here.

  9. REMOVE DECK SIDE TRIM BOX LH (for LH Side)


    1. for Full Size Spare Tire:


      1. Remove the deck side trim box LH Click here.

  10. REMOVE FRONT DECK FLOOR BOX (for LH Side)


    1. A01NH34

      Remove the clip and the front deck floor box.

  11. REMOVE SPARE WHEEL COVER ASSEMBLY (for RH Side)


    1. for Compact Spare Tire:


      1. Remove the spare wheel cover assembly Click here.

  12. REMOVE NO. 3 REAR FLOOR BOARD (for RH Side)


    1. for Compact Spare Tire:


      1. Remove the No. 3 rear floor board Click here.

  13. REMOVE NO. 3 REAR FLOOR BOARD (for RH Side)


    1. for Full Size Spare Tire:


      1. Remove the No. 3 rear floor board Click here.

  14. REMOVE DECK SIDE TRIM BOX RH (for RH Side)


    1. for Compact Spare Tire:


      1. Remove the deck side trim box RH Click here.

  15. REMOVE DECK SIDE TRIM BOX RH (for RH Side)


    1. for Full Size Spare Tire:


      1. Remove the deck side trim box RH Click here.

  16. REMOVE REAR SEAT ASSEMBLY LH (for LH Side)

    Tech Tips

    Refer to the procedure up to Remove Rear Seat Assembly LH Click here.

  17. REMOVE REAR SEAT ASSEMBLY RH (for RH Side)

    Tech Tips

    Refer to the procedure up to Remove Rear Seat Assembly RH Click here.

  18. REMOVE REAR DOOR SCUFF PLATE


    1. A01NEW9

      Disengage the 6 claws, 3 clips and guide, and remove the rear door scuff plate LH.

  19. REMOVE REAR FLOOR FINISH PLATE


    1. A01NCOE

      Disengage the 2 claws, 6 clips and 2 guides, and remove the rear floor finish plate.

  20. REMOVE REAR FLOOR FINISH SIDE PLATE


    1. A01ND4W

      Remove the clip.

    2. Disengage the claw and 2 clips.

    3. Disengage the guide and remove the rear floor finish side plate LH.

  21. REMOVE REAR SEAT SIDE COVER


    1. A01NFWF

      Remove the 2 clips.

    2. Disengage the 2 claws and 3 clips, and remove the rear seat side cover LH.

      Tech Tips

      A part of the clip remains on the vehicle side.

  22. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side)


    1. A01NFZ5

      Remove the No. 1 luggage compartment trim hook as shown in the illustration.

  23. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)


    1. A01NHVJ

      Remove the No. 1 luggage compartment trim hook as shown in the illustration.

  24. REMOVE ROPE HOOK ASSEMBLY


    1. A01NGK2E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 2 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the 2 bolts and the 2 rope hook assemblies.

  25. REMOVE RECLINING REMOTE CONTROL BEZEL


    1. A01NG5VE01

      Using moulding remover A, disengage the 2 bottom claws of the reclining remote control bezel LH.

    2. Lift the reclining remote control bezel LH as shown by the arrow (1) in the illustration.

    3. Turn the reclining remote control bezel LH as shown by the arrow (2) in the illustration, then disengage the 2 upper claws and remove the bezel.

  26. REMOVE HEIGHT CONTROL SWITCH (for RH Side)


    1. w/ Air Suspension:


      1. Remove the height control switch Click here.

  27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)


    1. Remove the 2 screws.

    2. Remove the 4 clips.

    3. Disengage the 5 claws and 2 clips.

    4. Disconnect each connector and remove the deck trim side panel assembly LH.

      A01NHT1

  28. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)


    1. Remove the 2 screws.

    2. Remove the 5 clips.

    3. Disengage the 5 claws and 2 clips.

    4. Disconnect the connector and remove the deck trim side panel assembly RH.

      A01NFKB

  29. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A01NCWP

      Disconnect each connector.

    2. Remove the 3 nuts.

    3. A01NG7FE01
      Text in Illustration
      *1 Guide
      *2 Pin

      Disengage the pin and guide, and remove the rear combination light assembly as shown in the illustration.