SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL


  1. REMOVE OUTER MIRROR GLASS


    1. A01NF4BE01

      Push the upper part of the mirror surface and tilt it.

    2. Apply protective tape to the areas shown in the illustration.

    3. Using a moulding remover, disengage the 2 claws at the lower part of the outer rear view mirror.

      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover
    4. A01NFMVE01

      Push the lower part of the mirror surface and tilt it.

    5. Apply protective tape to the areas shown in the illustration.

    6. Using a moulding remover, disengage the 2 claws at the upper part of the outer rear view mirror, and separate the outer rear view mirror glass.

      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover
    7. A01NF0T

      Disconnect each connector and remove the outer rear view mirror glass.

  2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. A01NEWA

      Remove the 4 screws.

    2. A01NF6G

      Disengage the 4 claws and disconnect the outer mirror cover with the side turn signal light assembly.

    3. A01NEM7

      Disconnect the connector and remove the outer mirror cover with the side turn signal light assembly.

    4. A01NGET

      Disengage the 2 claws and remove the side turn signal light assembly with the turn signal trim from the outer mirror cover.

    5. A01NCQO

      Disengage the 3 claws and remove the side turn signal light assembly from the turn signal trim.