DESCRIPTION
The AFS ECU (headlight swivel ECU assembly) receives signals indicating the swerve-angle from the steering angle sensor (spiral cable sub-assembly) using CAN communication.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2414 | Malfunction in steering angle sensor |
|
WIRING DIAGRAM
INSPECTION PROCEDURE
Note
First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this symptom.
PROCEDURE
CHECK FOR DTC
Clear the DTCs Click here.
Check for DTCs Click here.
| OK |
|---|
| DTC B2414 is not output. |
| NG |
|
REPLACE STEERING ANGLE SENSOR (SPIRAL CABLE SUB-ASSEMBLY) Click here |
| OK |
|
USE SIMULATION METHOD TO CHECK Click here
REPLACE STEERING ANGLE SENSOR (SPIRAL CABLE SUB-ASSEMBLY)
Temporarily replace the steering angle sensor (spiral cable sub-assembly) with a new or normally functioning one Click here.
| NEXT |
|
CHECK FOR DTC
Clear the DTCs Click here.
Recheck for DTCs Click here.
| OK |
|---|
| DTC B2414 is not output. |
| NG |
|
REPLACE AFS ECU (HEADLIGHT SWIVEL ECU ASSEMBLY) Click here |
| OK |
|
END