LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting / Light Control or Illuminated Entry.

    5. Select the setting by referring to the table below.

      Light Control
      Display Default Content Setting
      Response Time Normal Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position. Long / Normal
      Disp Ex ON Sen Normal Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock. Light2, Light1, Normal, Dark1 or Dark2
      Disp Ex OFF Sen Normal Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock. Light2, Light1, Normal, Dark1 or Dark2
      Sensitivity Normal Adjusts the sensitivity of the automatic light control system. Light2, Light1, Normal, Dark1 or Dark2
      Illuminated Entry
      Tester Display Default Content Setting
      Mirr-Foot-Lgt Approached ON Lights up the door mirror foot lights when a key enters any actuation area around the doors. ON or OFF
      Mirr-Foot-Lgt Unlocked ON Lights up door mirror foot lights when doors are unlocked using a mechanical key or door control transmitter. ON or OFF
      Mirr-Foot-Lgt w/Master SW ON

      • Lights up door mirror foot lights when driver side door control switch on the multiplex network master switch assembly is pushed to unlock position.

      • Lights up door mirror foot lights when front passenger side door control switch on the power window regulator switch assembly is pushed to unlock position.

      		 ON or OFF
      Mirror Foot Lighting Time 15 s Changes the lighting time of the door mirror foot lights. 7.5 s, 15 s, 30 s or 0 s
      Exterior Light Control ON Changes the door mirror foot light control. ON or OFF