RAIN SENSOR INSTALLATION


  1. INSTALL RAIN SENSOR TAPE

    Tech Tips

    Rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated.


    1. Clean the rain sensor sensing portion with a piece of cloth, etc.

    2. A01NGJTE01
      Text in Illustration
      *1 Rain Sensor Tape

      Peel off the smaller release sheet, and then attach the rain sensor tape on the rain sensor sensing portion as shown in the illustration.

      Standard Clearance
      Area Measurement
      A 13.5 mm (0.532 in.)
      B 7.5 mm (0.295 in.)

      Note

      Use your fingers to push out any air bubbles from under the tape.

  2. INSTALL RAIN SENSOR


    1. Clean the windshield glass with a piece of cloth, etc.

      Note


      • Make sure that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue.

      • If there is any rain sensor tape residue remaining on the windshield glass, replace the tape.

    2. When installing a new rain sensor or replacing the rain sensor tape:


      1. Peel off the release sheet.

        Tech Tips

        Do not touch the silicon coated surfaces.

    3. A01NF1WE01
      Text in Illustration
      *1 Stopper
      *2 Bracket

      Engage the 2 guides, and carefully install the rain sensor to the glass surface, preventing air bubbles from forming between the contact surfaces.

      Tech Tips

      Do not touch the silicon coated or glass surfaces.

    4. Push in the stopper.

    5. A01NCPZ

      Connect the connector.

  3. INSTALL RAIN SENSOR COVER


    1. A01NHNC

      Engage the 2 claws to install the rain sensor cover.