RAIN SENSOR REMOVAL


  1. REMOVE RAIN SENSOR COVER


    1. A01NHNC

      Disengage the 2 claws and remove the rain sensor cover.

  2. REMOVE RAIN SENSOR


    1. A01NCPZ

      Disconnect the connector.

    2. A01NHASE01
      Text in Illustration
      *1 Stopper

      Release the stopper by pulling it down.

    3. Remove the rain sensor as shown in the illustration.

  3. CLEAN WINDSHIELD GLASS

    Note


    • The rain sensor tape can be reused, however, replace it with a new one if it has dirt on it or it is damaged.

    • Check that the rain sensor tape does not remain on the windshield glass. If it does, remove it before installing the rain sensor.