HEADLIGHT CLEANER SWITCH INSTALLATION


  1. INSTALL HEADLIGHT CLEANER SWITCH ASSEMBLY


    1. A01NFDR

      Engage the 2 claws to install the headlight cleaner switch assembly as shown in the illustration.

  2. INSTALL NO. 1 SWITCH HOLE BASE


    1. Connect each connector.

    2. A01NFF7

      Engage the 4 claws and 2 guides to install the No. 1 switch hole base.

  3. INSTALL INSTRUMENT PANEL GARNISH LH


    1. A01NH3A

      Engage the 6 clips to install the instrument panel garnish LH.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL REAR DECK FLOOR BOX (w/ Air Suspension)


    1. A01NDSY

      Install the rear deck floor box with the 3 clips.

  6. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)


    1. Inspect the suspension control system Click here.